We provide great visibility for inspecting overhead distribution lines, Trading handles exceptionally well.


 Jump to Company:

About Elbarbary Building Material Co. Ltd.


The Nation' s premier Distributor, Stockiest of Building Material products was founded in 1906 by Late Hafez Elsayed Elbarbary with more than 106 years of experience, we have become experts in the area of wood and other building material products, providing a wide variety of products specifically designed and suitable for construction use.

After the restructure of the Group in 2008, the Building Material Business started its business as Elbarbary Building Materials Co. Ltd.

We deal in the following products:


Reinforced Round Bars:
The product is wear-resistant machine parts using Coil and Round Bar of metal material while cold drawing. - The product depends on high accuracy and credibility.

Angle Bars:
We provide the standards and grades of Steel angle bars in

  • 40 x 40
  • 45 x 45
  • 50 x 50
  • 60 x 60
  • 65 x 65
  • 70 x 70
  • 75 x 75
  • 80 x 80
  • 90 x 90**
  • 3mm
  • 4mm
  • 5mm
  • 6mm
  • 7mm
  • 8mm
  • 10mm**


Steel Sheet:
We can supply Galvanized Steel sheet, Stainless Steel, and Aluminum in additional gauges, sizes, and shapes including steel sheets, coils, angles channels, beams, T's, flats, rounds etc. Our products can be applied in various industries, including automotive, appliance, construction, manufacturing markets.
Steel Angles:
Is mainly used in a variety of construction structure and engineering structures such as factory, bridges and vehicles as large structure steels; also be used in steel towers and well stand as components.
1/8" x 1-1/2" x 1-1/2" x 72" Steel Angle, Hot Rolled Steel, Wieldable

Steel Bars:,
It is an economic, efficient and dependable concrete reinforcement suitable for all major reinforced concrete constructions such as buildings, bridges, reservoirs, roads, irrigation and power structures, dock and harbour structures, foundations, piles, precast concrete etc.

Steel Joist:
Steel Joist are custom-built structural elements used to support the floors and roof of a building. Steel joist supporting the floor and roofs of schools, factories, warehouses, stores and countless other structures throughout the country.


MDF Plain:
Today's most popular substrate and thin construction panel, Medium Density Fiberboard is available in 4' x 8' sheets, and thicknesses of 2.5mm - 18mm.

Other sizes available upon request. MDF Colour (one side & two side), Main advantages of coloured MDF:

  • Uniformity of Colour throughout
  • Environmentally friendly & Non toxic
  • Can be fitted without further finishing - maintains its technical and decorative features and can be waxed or varnished.
  • Mechanical resistance 30% higher than standard MDF(Colour Extra)
  • Moisture resistant (Colour Extra)
  • Stock size of 2500x1250mm yields size 2440x1220mm, even in the case of edge damage in transit when delivered to site in less than pallet quantities

Plywood is probably the most widely available manufactured board material. It is made by bonding together a number of thin veneers of softwood or hardwood - or a combination of each.

  • Exterior grade plywood (WBP - Weather and Boil Proof)
  • Internal plywood
  • Shuttering Ply

Plywood is normally available in 2440 x 1220 sheets (or subdivisions) and in thicknesses from 3 to 35 mm.

Shuttering Plywood:
Available with us is an extensive assortment of shuttering plywood, water resistant shuttering plywood which is designed for special application purposes. Our range rates high on durability as 170 GSM phenolic is carefully applied on both the sides of the ply to impart it with a superfine mirror finish on the surface and a water resistant layer which requires no further finishing and is widely appreciated across all civil construction firms for use in casting concrete slabs, beams and column boxes for a minor finish output softwood laminated

Edge laminated softwood board:
At first sight, edge laminated softwood board can look like one piece of timber, but it is actually made up of narrow (25 to 100 cm) strips of softwood glued edge to edge. This board is ideal for making furniture where the natural gain can be left exposed. Boards are available in a number of thicknesses (15, 18, 22, 28mm), widths (400, 450, 500, 600 mm) and lengths (1.2m to 2.1m). This wide choice means that the appropriate sheets can be selected to suit the job while minimizing waste. Some DIY superstores stock a surprisingly small range, so it may be necessary to visit a 'real' builder's merchant to see a wider range.

Chipboard Chipboard
Chipboard is made by bonding together wood particles with an adhesive under heat and pressure to form a rigid board with a relatively smooth surface. Chipboard is available in a number of densities; normal, medium and high-density. Normal density is fairly soft and 'flaky', high-density is very solid and hard (often used for worktops and fire doors) - medium density is somewhere in between.
There are exterior grades of chipboard available but most are only suitable for internal use as all but high-density tend to soak up water like a sponge. Once water logged, chipboard tends to swell and breakdown.

Veneered Chipboard Veneered Chipboard
is widely used for self-assembly furniture, work surfaces, wall linings and partitions. High-density chipboard is often used as a basis for the carcasses of kitchen furniture, worktops, and flooring - this is hardwearing, rigid and heavy. Other grades available are standard, flame-retardant, flooring, and moisture-resistant. Chipboard is normally available in 2440 x 1220 sheets (or subdivisions), finished veneered sheets are available in smaller sheets so that the four decorated edges do not need to be cut. Thicknesses range from 12 to 25 mm.

BlockboardBlockboard is composed of a core of softwood strips (up to about 25mm wide) placed edge to edge and sandwiched between veneers of hardwood, the 'sandwich' is then bonded under high pressure.
An interior grade adhesive is normally used, so blockboard is not suitable for use out of doors.
When using blockboard for such items as a door or a long table, make sure the core runs lengthways to give maximum strength. Blockboard can be used for shelves, doors, paneling and partitions.
Blockboard is normally available in 2440 x 1220 sheets (or subdivisions), thicknesses tend to be limited to around 30mm.

Hard Board:
Hardboard is a compressed, composite board. Fiber residuals are saturated in a wet process and then compressed to a sheet. A fine fiber overlay is applied (normally to one side) to provide smooth face. Hardboard is available in 49" x 97" sheets and standard thicknesses of:
5.0mm,    3/8",    1/2",    5/8",    3/4" Other sizes and thicknesses available upon request.White Wood Red Wood (Moski)

Red Maranti
Dark Red Meranti / Seraya Specie Technical Specifications - We specializes in Exotic Hardwood Flooring and Decking, Refinished Solid Flooring, Unfinished Solid Flooring and Engineered Flooring, and Imported Plywood and Panels.

Golden Teakwood
For better finishing and exotic look We can provide standard sizes for internal use are 305x305x10 mm (12"x12" x3/8"), 400x400x10 mm (16"x16" x3/8"), 457x457x10 (18"x18" x3/8") and also 600x600x10 mm tiles.

Beech wood
Beech Wood Lumber is primarily reddish-brown in color and slightly coarse with conspicuous rays and tiny pores. The grain is straight with a fine, even texture. High crush strength, medium stiffness and resistance to shock and excellent bending characteristics. Sizes available 4/4, 8/4.

Balk Wood
We are also dealing in roofing Balk wood from Sweden, available in all sizes and thickness. Termite, Water proof and light weight.




© 2018 Elbarbary Building Materials All Rights Reserved